TLK1211RCP

Product Summary

The TLK1211RCP is a gigabit ethernet transceiver provides for ultrahigh-speed, full-duplex, point-to-point data transmissions. The TLK1211RCP is based on the timing requirements of the 10-bit interface specification by the IEEE 802.3 gigabit ethernet specification and is also compliant with the ANSI X3.230-1994 (FC-PH) fibre channel standard. The TLK1211RCP supports data rates from 0.6 Gbps to 1.3 Gbps. The primary application of the transceiver is to provide building blocks for point-to-point baseband data transmission over controlled impedance media of 50 W. The transmission media can be printed-circuit board traces, copper cables, or fiber-optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Parametrics

TLK1211RCP absolute maximum ratings: (1)Supply voltage, VDD (see (2)): –0.3 V to 3 V; (2)Input voltage range at TTL terminals, VI: –0.5 V to 4 V; (3)Input voltage range at any other terminal: –0.3 V to VDD +0.3 V; (4)Storage temperature, Tstg: –65℃ to 150℃; (5)Electrostatic discharge CDM: 1 kV, HBM:4 kV; (6)Characterized free-air operating temperature range: -40℃ to 85℃.

Features

TLK1211RCP features: (1)0.6-Gbps to 1.3-Gbps Serializer/Deserializer; (2)Advanced 0.25-mm CMOS Technology; (3)Low Power Consumption ＜250 mW (typ) at 1.25 Gbps ; (4)No External Filter Capacitors Required; (5)Comprehensive Suite of Built-In Testability; (6)Fast Relock Times Less Than 256 ns (Typ) Suitable for PON Applications ; (7)IEEE 1149.1 JTAG Support; (8)2.5-V Supply Voltage for Lowest Power Operation; (9)LVPECL Compatible Differential I/O on High Speed Interface ; (10)3.3-V Tolerant on LVTTL Inputs; (11)Single Monolithic PLL Design; (12)Hot Plug Protection; (13)Support For 10-Bit Interface or Reduced Interface 5-Bit DDR (Double Data Rate) Clocking; (14)64-Pin VQFP With Thermally Enhanced Package (PowerPAD); (15)CPRI Data Rate Compatible (614 Mbps, 1.22 Gbps); (16)Receiver Differential Input Thresholds 200 mV Minimum; (17)Industrial Temperature Range Supported: –40℃ to 85℃; (18) ANSI X3.230-1994 (FC-PH) Fibre Channel Compliant.

Diagrams